The New Standard for Rod Hanging Applications Eddie Burlem, August 3, 2017February 16, 2024 HangerMate®+ Rod Hanging System for Concrete, Wood & Steel By DEWALT® Engineered by Powers™ HangerMate®+ Anchors are the newest line of rod hanging anchors developed by DEWALT® Engineered by Powers™. The HangerMate®+ Anchors are a one piece, steel anchor designed for rod hanging applications such as fire protection systems, ventilation systems, electrical conduit, pipe hanging and cable trays. HangerMate®+ Anchors come in a variety of styles designed for applications in concrete, steel & wood. Read on to learn more about the different styles and applications these rod hanging anchors come in. Shop now for all of the HangeMate+ product featured below at TannerBolt.com. {{cta(‘415b8e4d-0334-4626-a059-eb1cc5e33c19′,’justifycenter’)}} Applications for HangerMate®+ Anchors: Fire Sprinkler Pipes Ventilation Systems Cable Trays Suspended Ceilings Overhead Utilities Lighting Systems HangerMate®+ Anchors for Concrete Applications The Concrete HangerMate®+ Anchors have been tested and qualified for use in cracked concrete and seismic conditions. They require a 1/4″ ANSI masonry bit for installation, accept 1/4″ & 3/8″ diameter threaded rods and are also available in a 3/8″ male thread version. Concrete HangerMate®+ Anchors are available in 4 different styles: Internally Threaded, Externally Threaded, Pivot – Angled Applications & Suspender – Dual Directional. THREAD PROFILE – low torque, fast installation, full concrete engagement STANDARD 1/4″ BIT – no need for specialty bit for installation HARDENED STEEL – installs in hard concrete and remains ductile THREADED ROD – available in 1/4″ or 3/8″ rod sizes EXTERNAL 3/8″ THREAD – for attaching directly to anchor Approvals & Listings: International Code Council, Evaluation Service (ICC-ES). ESR-3889 code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC. FM Approvals (FM) – (see listing for applicable sizes and types). Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17 and ACI-318-11/08 Appendix D. Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors). Evaluated and qualified by an accredited independent testing laboratory for reliability against brittle failure, e.g. hydrogen embrittlement. HangerMate®+ Anchors for Steel Applications The Steel HangerMate®+ Anchors require a 1/4″ ANSI masonry bit for installation and accept 1/4″ & 3/8″ diameter threaded rods. They are available in 5 different styles: Vertical Applications, Horizontal Applications, Pivot – Angle Applications, Suspender – Dual Directional & Acoustical Ceiling Screw Eyelet. SELF-DRILLING POINT – eliminates pre-drilling ONE PIECE DESIGN – provides solid connection from steel to threaded rod SELF-TAPPING THREADS – low torque to install SIDE MOUNT OPTION – for horizontal applications STEEL DRIVER – spin off feature helps reduce over driving Approvals & Listings: International Code Council, Evaluation Service (ICC-ES). ESR code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, 2009 IBC/IRC, and 2006 IBC/IRC – PENDING. FM Approvals (FM) – (see listing for applicable sizes and types). Pipe Hangers components for automatic sprinkler systems – File No.(PENDING). Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17. Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors) HangerMate®+ Anchors for Wood Applications The Wood HangerMate®+ Anchors require a 1/4″ ANSI masonry bit for installation and accept 1/4″, 3/8″ & 1/2″ diameter threaded rods. They are available in 5 different styles: Vertical Applications, Horizontal Applications, Pivot – Angle Applications, Suspender – Dual Directional & Acoustical Ceiling Screw Eyelet. TYPE 17 GIMLET – easy material removal, no pre-drilling required SINGLE PIECE DESIGN – allows removal and adjustment SIDE MOUNT OPTION – for horizontal applications WOOD DRIVER – spin off feature helps reduce over driving Approvals & Listings: International Code Council, Evaluation Service (ICC-ES). ESR code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, 2009 IBC/IRC, and 2006 IBC/IRC – PENDING. FM Approvals (FM) – (see listing for applicable sizes and types). Pipe Hangers components for automatic sprinkler systems – File No.(PENDING). Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17. Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors). HangerMate®+ Pivot Specialty Rod Hanging Anchors Multiple threads designed for concrete, wood and steel Rotational head almost 90 degrees of rotation for flexible positioning Engineered steel hardened steel designed to cut through hard materials Torx drive full engagement when driving through tough material HangerMate®+ Suspender™ Specialty Rod Hanging Anchors Multiple threads different thread and point styles Twin lead thread greater thread engagement (concrete & wood) Dual directional thread one part for vertical or horizontal application HangerMate®+ Anchors Will Be Replacing.. HangerMate®+ Anchors will be replace the following lines of rod hanging anchors from Powers & Elco. Vertigo™ (Powers) Vertigo+™ (Powers) HangerMate® (Elco) Anchors