Learn What Makes Wood’s Powr-Grip Vacuum Cups the Go-To Tool Eddie Burlem, February 22, 2019February 19, 2024 A Staple in the Glass Industry for Over 50 Years Wood’s Powr-Grip Vacuum Cups were designed specifically for glass handling and have been the go-to tool of the glass industry and glaziers around the world. These pump style vacuum cups, allow the user to “put a handle” where they need it, when they need it on: flat glass, curved/bent glass, auto glass, pattern glass, stone or any nonporous material. Unlike regular suction cups, Wood’s Powr-Grip Vacuum Cups have the ability to create a more reliable hold. They also have the ability to be used on glasses of almost any thickness with little risk of damage, due to the full face of the vacuum pad creating contact with the glass. The release of the material being handled is quick and easy, with no “after-stick” or residue left behind. Wood’s Powr-Grip Vacuum Cups Available at Tanner Wood’s Powr-Grip 8″ Flat Vacuum Cup with Metal Handle Tanner Item ID: WPG N4950 (Buy Now on Tanner) Pad Diameter: 8″ (20 cm) Load Capacity: 125 lbs (57 kg) Surface Texture: Smooth Material Porosity: Nonporous Allowable Surface Curvature: Flat Fast attach and release Red-line indicator warns user of any significant vacuum loss Supplied with protective carrying case Wood’s Powr-Grip 10″ Concave Vacuum Cup with Metal Handle Tanner Item ID: WPG N6450 (Buy Now on Tanner) Pad Diameter: 10″ (25 cm) Load Capacity: 175 lbs (79 kg) Surface Texture: Smooth Material Porosity: Nonporous Allowable Surface Curvature: Curved Minimum Radius for Curved Loads: 13″ (330 mm) Minimum Material Thickness: 1/4″ (6.35 mm) Also attaches to flat surfaces, requires more pumping than hand cups for flat surfaces Durable metal handle Red-line indicator warns user of any significant vacuum loss Comes with protective carrying case Wood’s Powr-Grip 10″ Concave Vacuum Cup with ABS Handle Tanner Item ID: WPG N6000 (Buy Now on Tanner) Pad Diameter: 10″ (25 cm) Load Capacity: 175 lbs (79 kg) Surface Texture: Smooth Material Porosity: Nonporous Allowable Surface Curvature: Curved Minimum Radius for Curved Loads: 13″ (330 mm) Minimum Material Thickness: 1/4″ (6.35 mm) Fast attach and release Red-line indicator warns user of any significant vacuum loss Supplied with protective carrying case Cold Weather Restrictions for Vacuum Hand Cups Wood’s Powr-Grip Vacuum Cups are not designed for use at temperatures below 10° F or above 120° F (-12 & 49° C). The use of Powr-Grip Vacuum Cups at temperatures below 10° F is not recommended. Learn How to Use Wood’s Powr-Grip Handheld Vacuum Cups How To Properly Clean Your Wood’s Powr-Grip Vacuum Pads Cutting Tools