“Heads Up!” Help Prevent Injuries with the Proper Tool Drop Protection Equipment from Tanner Eddie Burlem, January 14, 2014February 16, 2024 Falling tools and other objects can be an extremely dangerous hazard on the job site. These falling objects can cause injuries ranging from minor abrasions to concussions, or even death. With this potential risk being present every day on most job sites, foremen and other workers would be foolish to not take the right precautions to eliminate these dangers the best they can. To eliminate these dangers the right safety equipment needs to be used at all times. Here at Tanner, we have all the Safety and Personal Protection Equipment needed to keep you and your fellow workers safe while working on the job site. First off you need to make sure you protect the most important part of your body, and that is your head! We offer a wide selection of colors of Omega II Safety Helmets. Omega II Safety Helmets meet ANSI Z89.1-2009, Type 1 Class C, E and G requirements. They also feature a 6-point suspension and adjust to head sizes of 6-1/2 to 8. Adding Reflective Strips to your safety helmets will allow you to be seen easier by everyone and in turn, will keep the jobsite a safer place. Omega II Safety Helmets Now that your head is protected, let us keep your tools from becoming unidentified falling objects. We have a large selection of different Tool Drop Protection Equipment that will suit everyone’s needs. Our Tool Drop Holsters & Toolbelts will help keep your tools where they belong while not in use. The next thing you need to do is to be sure that these tools are properly tethered to the holster or toolbelt that you are using. To do this you can use one of our many Attachment Points which include: Quick Wrap Tape, Heat Shrink Links, V-Ring and D-Ring Lanyards Adaptors, and much more. Using one of the Attachment Points you can now connect to one of our Tool Lanyards or Extensions to allow you plenty of room to operate and use your tools safely. Come shop for all your Tool Drop Protection needs here at TannerBolt.com Tool Drop Equipment Safety