Find the Right Adhesive Anchoring System for Your Job Eddie Burlem, May 26, 2017February 16, 2024 Adhesive Anchoring Systems from DeWalt® Engineered by Powers™ The Bond that Holds the System Together With 3 levels of performance, these new adhesive anchors allow you the choice from the cost efficient options all the way to the heavy duty working load options, that will give you the highest level of performance. All 3 levels of the new adhesive anchoring systems from DeWalt® Engineered by Powers™ will provide you with reliable installation each and every time. Read on to learn more about each of these new lines of adhesive anchors. From the High Performance to the Basic lines, we want to help you find the right adhesive for your job. Looking for ICC-ES & Seismic Approved Adhesive Anchors? When looking for ICC-ES and Seismic approved adhesive anchors, be sure to check out the High Performance and Standard Adhesive Anchoring Systems. The AC200+™, PURE110+®, AC100+ GOLD® are all ICC-ES and Seismic approved adhesive anchoring systems. With the PURE50+™ only being ICC-ES approved. High Performance Adhesives AC200+™ – Acrylic Injection Adhesive Anchoring System ICC-ES APPROVED – approved for cracked and uncracked concrete SEISMIC – approved for seismic design categories A-F BOND STRENGTH – high performance CONVENIENT – wide installation temperature range with small edge distances and spacings EASY TO USE – fast hardening adhesive; reliable installation and easy to dispense CLEANING – hand or power brush clean; or use the Hollow Drill Bit / DustX+™ cleaning method EMBEDMENT – depths ranging from 4d to 20d PURE110+® – Epoxy Injection Adhesive Anchoring System ICC-ES APPROVED – approved for cracked and uncracked concrete, and seismic applications ICC-ES APPROVED – for post-installed rebar SEISMIC – approved for seismic design categories A-F BOND STRENGTH – high bond strength at 110° F; no reduction in bond strength due to service temperature shifts VERSATILE – dispensing options – 1:1 and 3:1 CONVENIENT – easy hole cleaning methods and fast curing times Standard Adhesives AC100+ GOLD® – Vinylester Injection Adhesive Anchoring System ICC-ES APPROVED – approved for cracked and uncracked concrete, and grouted or hollow masonry SEISMIC – approved for seismic design categories A-F LOW TEMPERATURE DISPENSING – approved for dispensing down to 14° F VERSATILE – low odor formula with quick cure time DOT – wide range of listings; 27 states CERTIFIED TO NSF/ANSI 61 – drinking water system components PURE50+™ – Epoxy Injection Adhesive Anchoring System ICC-ES APPROVED – approved for cracked and uncracked concrete EVALUATED AND RECOGNIZED – for long and short term loading INSTALLATION TEMPERATURE – can be installed in a wide range of base material temperatures TESTED – for creep resistance DESIGNED – specifically with road, bridge and concrete contractors in mind EVALUATED AND RECOGNIZED – for freeze/thaw performance Basic Adhesives AC50™ – Adhesive Anchoring SystemCURES – down to 5° F INSTALLATION TEMPERATURE – installs in a wide range of material temperatures EVALUATED AND RECOGNIZED – for long and short term loading PURE GP – Epoxy Injection Adhesive Anchoring System DESIGNED – for use with threaded rod and rebar Anchors