Tag Archives: screw anchor

Wedge-Bolt+ / Screw-Bolt+ Screw Anchors Cross Reference Chart

Out with the Old & In with the New

In one of our previous blog posts Screw-Bolt+™ – The New Standard for Heavy Duty Screw Anchors we mention the Screw-Bolt+™ Screw Anchors will be replacing the Powers Wedge-Bolt+® Screw Anchors. While there is still a limited amount of stock left in the Wedge-Bolt+ Anchors, once this stock is depleted, you will no longer be able to purchase them. You will have to buy the new and improved Screw-Bolt+ Screw Anchors.

To make the transition easier for our customers, we made a cross-reference chart of the old Wedge-Bolt+ part numbers with the new Screw-Bolt+ part numbers, that match up the corresponding sizes and finishes. While some of the Wedge-Bolt+ Screw Anchors are still available on our website, please remember these may become unavailable any day now. If you need more information about the new Screw-Bolt+ Screw Anchors, please reference our previous Screw-Bolt+™ – The New Standard for Heavy Duty Screw Anchors blog post.

Wedge-Bolt+ to Screw-Bolt+ Screw Anchors Cross Reference Chart

View, Save & Share: Wedge-Bolt+ to Screw-Bolt+ Screw Anchors Cross Reference Chart

Which Stainless Steel Anchor Should I Use for Masonry & Concrete?

Tanner offers three different levels of stainless steel anchors for use in concrete and masonry that is subject to corrosive environments.

UltraCon® SS4 is a threaded masonry anchor that offers the same proven performance as UltraCon masonry fasteners with the enhanced feature of 410 stainless steel and Stalgard® protective coating.

In fact, the UltraCon SS4 outperformed Stainless Steel Tapcon® screws in a 1500 hour salt spray test and has higher pull out values. UltraCon SS4 is available in 1/4” diameter in 5/16” diameter Hex Washer Head and #3 Phillips TrimFit Flat Head, from 1-1/4” up to 4” in length. Very easy to use- just drill and drive!

For more demanding applications, such as products utilized for hurricane reinforcement, use Crete-Flex® fasteners which receive a special hardening process during manufacture that maximizes corrosion resistance and ductility. In addition, Crete-Flex fasteners receive the unique Stalgard® coating process for further protection. After 2,400 hours in a salt spray cabinet (per ASTM B117), Crete-Flex fasteners show no signs of red rust.

Easily installed with a commercial-grade hammer drill or rotary hammer and a specially sized Crete-Flex carbide-tipped drill bit.

If your job includes working in an exposed area, such as coastal or wetlands, use Aggre-Gator® Bi-Metal Threaded Anchors. Perfect for installation of aluminum enclosures, hurricane shutters, windows, awnings, thresholds, curtain wall, window, and stone façade support anchors.

Aggre-Gator features a 300 series stainless head and shank with fused and hardened steel tapping threads and a gimlet point, hence “bi-metal” technology. 300 series stainless alloy gives unmatched corrosion protection while the steel tapping threads hold tight in the block and poured concrete. To top it off, coated with silver-colored Stalgard® GB, a Galvanic Barrier to protect aluminum components from accelerated corrosion when in contact with 300 series stainless steel.

ICC-ES Reports for Code Compliant Anchors

ESR-2966 ICC-ES Report for Power-Stud+SD1 Wedge Anchor (Masonry Anchorage)

ESR-2582 ICC-ES Report for AC100+Gold All Weather Injection Adhesive

ESR-2818 ICC-ES Report for Power-Stud+SD1 Wedge Anchor (Concrete Anchoring)

ESR-2526 ICC-ES Report for Wedge-Bolt+ Screw Anchor (Concrete Anchoring)

ESR-2502 ICC-ES Report for Power-Stud+SD2 Wedge Anchor

ESR-2272 CC-ES Report for Snake+ Internally Threaded Anchor

ESR-1678 ICC-ES Report for Wedge-Bolt+ (Masonry Anchorage)

ESR-3066 ICC-ES Report for T308+ Epoxy

ESR-2583 ICC-ES Report for PE1000+ High Strength Epoxy