Tag Archives: dewalt

Adhesives & Sealants for Work & Security

Wide Variety of Adhesives & Sealant Available

Adhesives & Sealants come in a wide variety styles, each with it’s own specific applications and uses. General purpose for everyday use, heavy duty anchoring systems for industrial applications and tamper resistant compounds used for security reasons. With the growing number of adhesives & sealants out there, it can be easy to mistakenly use one of these for the wrong use. Read on to learn more about some of these adhesives & sealants that Tanner has to offer its customers and learn more about the specific uses and applications they were made for.

Security Sealants

DynaPoxy™ EP-1200DynaPoxy EP-1200

“Pick-Proof” Rigid, Two-Part, Epoxy Resin Compound

DynaPoxy™ EP-1200 is a “pick-proof” rigid, two-part, epoxy resin compound. It has been specially designed to be an excellent joint sealant for high security areas of prisons and other security areas. DynaPoxy™ EP-1200 can also be used as a structural adhesive for vertical & overhead bonding, grouting and for bolt embedment, due to its high compressive strength and non-sag properties. It is packaged in a 1-1/2 gallon unit including the Base and Activator. Color Packs are available separately for purchase.

  • Outstanding adhesion to similar or dissimilar materials, particularly in concrete and metal.
  • Use in high security areas where a harder material is required and flexibility is less important.

DynaFlex™ SC

Tamper-Resistant, One-Part, Non-Sag Elastometric STPU

DynaFlex™ SC is a tamper resistant security sealant. DynaFlex™ SC is more flexible than epoxy in composition and is designed to achieve high tensile and tear strengths, abrasion resistance and an average ultimate hardness of at least 55, yet withstand 25% total joint movement. This is a unique one-part, non-sag, tamper-resistant elastometric STPU joint sealant with many of the strengths of two-component security sealants but with the user-friendly ease-of application properties of a one component sealant.DynaFlex SC

  • This rugged but flexible sealant is ideally suited for use in institutional and correctional complex security installations.
  • Performs equally well in other public buildings and facilities where ordinary sealants are easily damaged or torn out by tampering and acts of vandalism.

Heavy Duty Adhesive Anchoring Systems

AC200+™

Two-Component, Acrylic Injection Adhesive Anchoring SystemAC200+

The AC200+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The AC200+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete base materials.

  • Code Listed: ICC-ES ESR-4027 for cracked and uncracked concrete
  • Evaluated and recognized for freeze/thaw performance
  • Cartridge design allows for multiple uses using extra mixing nozzles
  • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
  • Evaluated and recognized for long term and short term loading

Pure110+

Two-Component, Epoxy Adhesive Anchoring SystemPure 110+

The Pure110+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The Pure110+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete and masonry base materials. Pure110+ has the same bond strength at room temperature and at 110°F.

  • Code Listed: ICC-ES ESR-3298 for cracked and uncracked concrete
  • Evaluated and recognized for freeze/thaw performance
  • Cartridge design allows for multiple uses using extra mixing nozzles
  • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
  • Evaluated and recognized for long term and short term loading
  • Same bond strength at room temperature and at 110ºF.

AC100+ Gold

Two-Component, Vinylester Adhesive Anchoring SystemAC100+ Gold

The AC100+ Gold is a two-component vinylester adhesive anchoring system that meets IBC for strength design of concrete anchors. Ideal for cold and moderate weather applications and works well in damp/wet holes. The AC100+ Gold is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials and can also be used to anchor into hollow masonry materials using screen tubes.

  • Code Listed: ICC-ES ESR 2582 for cracked and uncracked concrete
  • Designed for use with threaded rod and reinforcing bar hardware elements
  • Consistent performance in low and high strength concrete (2,500 to 8,500 psi)
  • Evaluated and recognized for freeze/thaw performance
  • Evaluated and recognized for a range of embedments in interior and exterior applications
  • Versatile low odor formula with quick cure time
  • Evaluated and recognized for long term and short term loading
  • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
  • Cartridge design allows for multiple uses using extra nozzles

General Purpose Bonding Adhesive / Sealants

Powerstick

One-Component, Universal Adhesive / SealantPower Stick

PowerStick is a non hazardous, virtually odorless, one-component universal adhesive and sealant. PowerStick is the first professional grade product on the market that delivers high bond strength along with superior flexibility. It features a high aggressive initial tack, and will not react with the substrate when installed. It will not shrink and can even be applied to wet surfaces. PowerStick does not contain solvents, isocyanates, and is VOC compliant, which allows it to be shipped without any special shipping procedures. Cleaning up is easy with just soap and warm water or mineral spirits.

  • Elastic properties – can be used as a sealant for filling cracks and joints
  • No harmful components, solvent free and is VOC compliant (no isocyanates)
  • Can be shipped without restriction and is environmentally friendly
  • Inert formula will not interact with substrates such as metal trim, silver lining on mirrors, or foam insulation board
  • Works on virtually every base material
  • MS formula is not affected by water, moisture, or mildew during service
  • UV resistant formula is suitable for outdoor use
  • Superior initial tack
  • Accepts primer and paint unlike silicone based sealants

 

Wedge-Bolt+ / Screw-Bolt+ Screw Anchors Cross Reference Chart

Out with the Old & In with the New

In one of our previous blog posts Screw-Bolt+™ – The New Standard for Heavy Duty Screw Anchors we mention the Screw-Bolt+™ Screw Anchors will be replacing the Powers Wedge-Bolt+® Screw Anchors. While there is still a limited amount of stock left in the Wedge-Bolt+ Anchors, once this stock is depleted, you will no longer be able to purchase them. You will have to buy the new and improved Screw-Bolt+ Screw Anchors.

To make the transition easier for our customers, we made a cross-reference chart of the old Wedge-Bolt+ part numbers with the new Screw-Bolt+ part numbers, that match up the corresponding sizes and finishes. While some of the Wedge-Bolt+ Screw Anchors are still available on our website, please remember these may become unavailable any day now. If you need more information about the new Screw-Bolt+ Screw Anchors, please reference our previous Screw-Bolt+™ – The New Standard for Heavy Duty Screw Anchors blog post.

Wedge-Bolt+ to Screw-Bolt+ Screw Anchors Cross Reference Chart

View, Save & Share: Wedge-Bolt+ to Screw-Bolt+ Screw Anchors Cross Reference Chart

Brooklyn West 1st Anniversary Celebration

Celebrate with a DEWALT Promo Day at Our Brooklyn West Showroom

To celebrate the 1st anniversary of our Brooklyn West Showroom, we are giving back to our loyal customers that made this event possible. The celebration kicks off Wednesday, September 27th, from 8 A.M. to 3 P.M. We will be featuring a DEWALT Promo Day loaded with great money saving deals, along with a few extra Champion Cutting Tool deals as well. All promos are IN STORE ONLY, so be sure to stop in so you don’t miss out.

Promos You Don’t Want to MissDEWALT Buk-A-Blade Promo

All of the Promos we will be running for Brooklyn West 1st Anniversary Celebration can be seen here – View All Brooklyn West Promos. Please feel free to print, share and pass around the Brooklyn West Promo PDF to fellow employers and employees to help spread the savings to others. Some of our highlighted Promo can be seen below.

  • Buy a DEWALT DCL070T1 20V MAX* Bluetooth LED Area Light and receive a FREE DEWALT DCR025 Bluetooth Charger RadioDEWALT Radio Promo
  • Buy $500 (any mix) of DEWALT DWA8280H, DWA8281H or DWA8282H Flap Discs and receive a FREE tool of choice, DEWALT D25263k SDS+ Hammer Kit or DEWALT DWE402 Small Angle Grinder
  • Buck-A-Blade for the DEWALT DWA8951 4-1/2″ x .045″ x 7/8″ Metal Cutting Wheels (25 per box)
  • Buy any 1 FLEXVOLT 2 Battery Tool Kit and receive FREE DEWALT DCD996B Brushless Hammerdrill & DEWALT DCB609 20V/60V FLEXVOLT 9.0AH Battery

Need Help Finding Our Brooklyn West LocationDEWALT Abrasive Promo

If you need direction to our Brooklyn West Location, please use the following link: Directions to Tanner Brooklyn West

Brooklyn West Google Maps

 

Screw-Bolt+™ – The New Standard for Heavy Duty Screw Anchors

High-Performance Screw Anchors

One of the newer products put out by DEWALT® Engineered by Powers™, is the Screw-Bolt+™, a high-performance Screw Anchors. These screw anchors are one piece and have a finished hex head. Screw-Bolt+™ Anchors are very user friendly, with a simple installation process, easy identification, and are fully removable. They feature a patented thread design that is designed to be used with standard ANSI drill bits, which reduces installation torque and enhances productivity by reducing installation time. The heavy-duty steel threads tap into the drilled hole during installation to provide a keyed engagement and allow for reduced edge and spacing distances.

*NEW PRODUCT UPDATE* – Flat Head Screw-Bolt+™ Screw Anchors

The NEW FlatHhead Screw-Bolt+ Screw Anchors are offered in 1/4″, 3/8″ & 1/2″ diameter, with lengths ranging from 2-1/2″ – 5″. Manufactured from carbon steel with a bright zinc plated finish.

Dewalt-Single-Flat-ScrewboltPlus-New-Banner

Available in 2 finishes…ScrewBolt+ Installation

Screw-Bolt+™ Screw Anchors are Suitable for Installation in..

  • Normal-weight concrete
  • Sand-lightweight concrete
  • Concrete over steel deck
  • Concrete masonry
  • Solid clay brick

Will the Screw-Bolt+™ Be Replacing Any Products?ScrewBolt+

Yes, the Screw-Bolt+™ Screw Anchors will be replacing (2) lines of Powers products: Wedge-Bolt® Screw Anchors and Wedge-Bolt+® Screw Anchors. There is still a limited amount of stock available for the (2) product lines, but once the stock is depleted there will be no more made. In regards to the 316 Stainless Steel Wedge-Bolt™, this product has transitioned to the DEWALT® Engineered by Powers™ brand and will continue to be manufactured.

Key Features & Benefits of the Screw-Bolt+™ Screw Anchors

  • Designed for standard ANSI tolerance drill bitsScrewBolt+ Head Marking
  • Patented thread design offers low installation torque
  • Tough threads for tapping high strength concrete
  • Ratchet teeth on underside of hex washer head lock against the fixture
  • Can be installed closer to the edge than traditional expansion anchors
  • Fully removable and reinstallable in same hole
  • Fast installation with powered impact wrench
  • Diameter, length and identifying marking stamped on head of each anchor
  • One-piece, finished head design

Screw-Bolt+™ Screw Anchor Approvals & Listings

  • International Code Council, Evaluation Service (ICC-ES), ESR-3889 for concrete. Code compliant with 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC, and 2009 IRC
  • Tested in accordance with ACI 355.2 and ICC-ES AC193 for use in structural applications in concrete under the design provisions of ACI 318 (Strength Design Method)
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)
  • Evaluated and qualified by an accredited independent testing laboratory for reliability against brittle failure, e.g. hydrogen embrittlement

ScrewBolt+ Approvals Listings

Screw-Bolt+™ – User Approved, Performance Guaranteed

The New Standard for Rod Hanging Applications

HangerMate Banner

HangerMate®+ Rod Hanging System for Concrete, Wood & Steel

By DEWALT® Engineered by Powers™

HangerMate®+ Anchors are the newest line of rod hanging anchors developed by DEWALT® Engineered by Powers™. The HangerMate®+ Anchors are a one piece, steel anchor designed for rod hanging applications such as fire protection systems, ventilation systems, electrical conduit, pipe hanging and cable trays. HangerMate®+ Anchors come in a variety of styles designed for applications in concrete, steel & wood. Read on to learn more about the different styles and applications these rod hanging anchors come in. Shop now for all of the HangeMate+ product featured below at TannerBolt.comHangerMate+ Products

Applications for HangerMate®+ Anchors:

  • Fire Sprinkler Pipes
  • Ventilation Systems
  • Cable Trays
  • Suspended Ceilings
  • Overhead Utilities
  • Lighting Systems

HangerMate®+ Anchors for Concrete Applications

The Concrete HangerMate®+ Anchors have been tested and qualified for use in cracked concrete and seismic conditions. They require a 1/4″ ANSI masonry bit for installation, accept 1/4″ & 3/8″ diameter threaded rods and are also available in a 3/8″ male thread version. Concrete HangerMate®+ Anchors  are available in 4 different styles: Internally Threaded, Externally Threaded, Pivot – Angled Applications & Suspender – Dual Directional.

  • THREAD PROFILE – low torque, fast installation, full concrete engagement
  • STANDARD 1/4″ BIT – no need for specialty bit for installationConcrete HangerMate+
  • HARDENED STEEL – installs in hard concrete and remains ductile
  • THREADED ROD – available in 1/4″ or 3/8″ rod sizes
  • EXTERNAL 3/8″ THREAD – for attaching directly to anchor

Approvals & Listings:Faster Installation

  • International Code Council, Evaluation Service (ICC-ES). ESR-3889 code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC.
  • FM Approvals (FM) – (see listing for applicable sizes and types).
  • Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17 and ACI-318-11/08 Appendix D.
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors).
  • Evaluated and qualified by an accredited independent testing laboratory for reliability against brittle failure, e.g. hydrogen embrittlement.

HangerMate®+ Anchors for Steel Applications

The Steel HangerMate®+ Anchors require a 1/4″ ANSI masonry bit for installation and accept 1/4″ & 3/8″ diameter threaded rods. They are available in 5 different styles: Vertical Applications, Horizontal Applications, Pivot – Angle Applications, Suspender – Dual Directional & Acoustical Ceiling Screw Eyelet.

  • SELF-DRILLING POINT – eliminates pre-drillingSteel HangerMate+
  • ONE PIECE DESIGN – provides solid connection from steel to threaded rod
  • SELF-TAPPING THREADS – low torque to install
  • SIDE MOUNT OPTION – for horizontal applications
  • STEEL DRIVER – spin off feature helps reduce over driving

Approvals & Listings:

  • International Code Council, Evaluation Service (ICC-ES). ESR code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, 2009 IBC/IRC, and 2006 IBC/IRC – PENDING.Steel HangerMate+ Comparison
  • FM Approvals (FM) – (see listing for applicable sizes and types).
  • Pipe Hangers components for automatic sprinkler systems – File No.(PENDING).
  • Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17.
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)

HangerMate®+ Anchors for Wood Applications

The Wood HangerMate®+ Anchors require a 1/4″ ANSI masonry bit for installation and accept 1/4″, 3/8″ & 1/2″ diameter threaded rods. They are available in 5 different styles: Vertical Applications, Horizontal Applications, Pivot – Angle Applications, Suspender – Dual Directional & Acoustical Ceiling Screw Eyelet.Wood HangerMate+

  • TYPE 17 GIMLET – easy material removal, no pre-drilling required
  • SINGLE PIECE DESIGN – allows removal and adjustment
  • SIDE MOUNT OPTION – for horizontal applications
  • WOOD DRIVER – spin off feature helps reduce over drivingReduced Splitting

Approvals & Listings:

  • International Code Council, Evaluation Service (ICC-ES). ESR code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, 2009 IBC/IRC, and 2006 IBC/IRC – PENDING.
  • FM Approvals (FM) – (see listing for applicable sizes and types).
  • Pipe Hangers components for automatic sprinkler systems – File No.(PENDING).
  • Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17.
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors).

HangerMate®+ Pivot Specialty Rod Hanging AnchorsPivot HangerMate+

  • Multiple threads designed for concrete, wood and steel
  • Rotational head almost 90 degrees of rotation for flexible positioning
  • Engineered steel hardened steel designed to cut through hard materials
  • Torx drive full engagement when driving through tough material

HangerMate®+ Suspender™ Specialty Rod Hanging AnchorsSuspender HangerMate+

  • Multiple threads different thread and point styles
  • Twin lead thread greater thread engagement (concrete & wood)
  • Dual directional thread one part for vertical or horizontal application

HangerMate®+ Anchors Will Be Replacing..

HangerMate®+ Anchors will be replace the following lines of rod hanging anchors from Powers & Elco.

  • Vertigo™ (Powers)
  • Vertigo+™ (Powers)
  • HangerMate® (Elco)

Find the Right Adhesive Anchoring System for Your Job

Adhesive Anchoring Systems from DeWalt® Engineered by Powers™

The Bond that Holds the System Together

With 3 levels of performance, these new adhesive anchors allow you the choice from the cost efficient options all the way to the heavy duty working load options, that will give you the highest level of performance. All 3 levels of the new adhesive anchoring systems from DeWalt® Engineered by Powers™ will provide you with reliable installation each and every time. Read on to learn more about each of these new lines of adhesive anchors. From the High Performance to the Basic lines, we want to help you find the right adhesive for your job.

Looking for ICC-ES & Seismic Approved Adhesive Anchors?

When looking for ICC-ES and Seismic approved adhesive anchors, be sure to check out the High Performance and Standard Adhesive Anchoring Systems. The AC200+™,  PURE110+®, AC100+ GOLD® are all ICC-ES and Seismic approved adhesive anchoring systems. With the PURE50+™ only being ICC-ES approved.

High Performance Adhesives

AC200+™ – Acrylic Injection Adhesive Anchoring SystemAC200

  • ICC-ES APPROVED – approved for cracked and uncracked concrete
  • SEISMIC – approved for seismic design categories A-F
  • BOND STRENGTH – high performance
  • CONVENIENT – wide installation temperature range with small edge distances and spacings
  • EASY TO USE – fast hardening adhesive; reliable installation and easy to dispense
  • CLEANING – hand or power brush clean; or use the Hollow Drill Bit / DustX+™ cleaning method
  • EMBEDMENT – depths ranging from 4d to 20d

AC200 Listings


PURE110+® – Epoxy Injection Adhesive Anchoring SystemPure110

  • ICC-ES APPROVED – approved for cracked and uncracked concrete, and seismic applications
  • ICC-ES APPROVED – for post-installed rebar
  • SEISMIC – approved for seismic design categories A-F
  • BOND STRENGTH – high bond strength at 110° F; no reduction in bond strength due to service temperature shifts
  • VERSATILE – dispensing options – 1:1 and 3:1
  • CONVENIENT – easy hole cleaning methods and fast curing times

Pure110 Listings


Standard Adhesives

AC100+ GOLD® – Vinylester Injection Adhesive Anchoring SystemAC100gold

  • ICC-ES APPROVED – approved for cracked and uncracked concrete, and grouted or hollow masonry
  • SEISMIC – approved for seismic design categories A-F
  • LOW TEMPERATURE DISPENSING – approved for dispensing down to 14° F
  • VERSATILE – low odor formula with quick cure time
  • DOT – wide range of listings; 27 states
  • CERTIFIED TO NSF/ANSI 61 – drinking water system components

AC100Gold Listings


PURE50+™ – Epoxy Injection Adhesive Anchoring Systempure50

  • ICC-ES APPROVED – approved for cracked and uncracked concrete
  • EVALUATED AND RECOGNIZED – for long and short term loading
  • INSTALLATION TEMPERATURE – can be installed in a wide range of base material temperatures
  • TESTED – for creep resistance
  • DESIGNED – specifically with road, bridge and concrete contractors in mind
  • EVALUATED AND RECOGNIZED – for freeze/thaw performance

Pure50 Listings


Basic Adhesives

AC50™ – Adhesive Anchoring SystemAC50CURES – down to 5° F

  • INSTALLATION TEMPERATURE – installs in a wide range of material temperatures
  • EVALUATED AND RECOGNIZED – for long and short term loading

AC50 Listings


PURE GP – Epoxy Injection Adhesive Anchoring SystemPureGP

  • DESIGNED – for use with threaded rod and rebar

PureGP Listings

Did You Know, Powers Carbide Drill Bits are Being Discontinued?

Power Carbide Bits Being Replaced by DeWalt Branded Carbide Drill Bits

If you have not heard yet, the rumors are true. Powers Carbide Drill Bits are no longer being manufactured and are being replaced with DeWalt branded Carbide Drill Bits. The process has already started and once the stock has been depleted you will no longer be able to buy Powers Carbide Drill Bits. With the help from Tanner we will help you find the comparable DeWalt bits for your favorite Powers bits. Read on to learn about the DeWalt product lines that will be replacing the old Powers product lines.

Quick Overview of Replacement Carbide Drill Bit Lines (Powers to DeWalt)

  • Powers Fat-Head™ Carbide Drill Bits –> DeWalt 4 Cutter High Impact SDS + Full Head Carbide Masonry Drill Bits
  • Powers Quatro™ Head SDS+ Carbide Drill Bits –> DeWalt 4 Cutter High Impact SDS+ Carbide Masonry Drill Bits
  • Powers S-4 Plus SDS Carbide Drill Bits –> DeWalt 2 Cutter SDS+ Masonry Drill Bits
  • Powers 4-X Cutter SDS-Max® Drill Bits –> DeWalt 4 Cutter High Impact SDS Max Carbide Masonry Drill Bits
  • Powers Single Tip SDS-Max® Drill Bits –> DeWalt 2 Cutter SDS Max Carbide Masonry Drill Bits
  • Powers 4-X Cutter Head Spline Drill Bits –> DeWalt 4 Cutter High Impact Spline Carbide Masonry Drill Bits
  • Powers Single Tip Spline Drill Bits –> DeWalt 2 Cutter Spline Carbide Masonry Drill Bits
  • Powers HD Straight Shank Bits –> DeWalt Premium 2 Cutter Percussion Carbide Masonry Drill Bits

DeWalt 4 Cutter High Impact SDS+ Full Head Carbide Masonry Drill BitsFatHead - HI Full Head SDS+

Replacing Powers Fat-Head™ Carbide Drill Bits

  • 2X more carbide for Long Life
  • High Impact Tip for Maximum Durability and Long Life
  • Open Head Design for Faster Material Removal
  • Elongated 4 Flute Design for Faster Drilling
  • Innovative Bonding System Delivers Extreme Durability

Click here to see the full comparison chart and to shop for DeWalt High Impact SDS + Full Head Carbide Masonry Drill Bits

DeWalt 4 Cutter High Impact SDS+ Carbide Masonry Drill BitsQuatro - HI 4 Cutter

Replacing Powers Quatro™ Head SDS+ Carbide Drill Bits

  • 2X more carbide for Long Life
  • High Impact Tip for Maximum Durability and Long Life
  • Open Head Design for Faster Material Removal
  • Elongated 4 Flute Design for Faster Drilling
  • Innovative Bonding System Delivers Extreme Durability

Click here to see the full comparison chart and to shop for DeWalt High Impact 4 Cutter SDS+ Carbide Masonry Drill Bits

DeWalt 2 Cutter SDS+ Masonry Drill BitsS4 - 2 Cutter SDS+

Replacing Powers S-4 Plus SDS Carbide Drill Bits

  • Carbide tip design maximizes carbide surface contact for longer bit life
  • Guaranteed to set 25% more anchors than standard masonry bits
  • Elongated Four Flute Helix for Faster Material Removal
  • Increased Steel Prevents Breakage

Click here to see the full comparison chart and to shop for DeWalt 2 Cutter SDS+ Carbide Masonry Drill Bits

DeWalt 4 Cutter High Impact SDS Max Carbide Masonry Drill Bits4X - HI 4 Cutter SDS Max

Replacing Powers 4-X Cutter SDS-Max® Drill Bits

  • High Impact tip maximizes carbide surface contact for longer bit life
  • Open head design channels dust into flutes for quicker drilling
  • Longer helix four flute design expedites mill removal for quicker drilling
  • U-Flute cleans debris out for fast, efficient drilling

Click here to see the full comparison chart and to shop for DeWalt High Impact 4 Cutter SDS Max Carbide Masonry Drill Bits

DeWalt 2 Cutter SDS Max Carbide Masonry Drill Bits4X - 2 Cutter SDS Max

Replacing Powers Single Tip SDS-Max® Drill Bits

  • Carbide tip design maximizes carbide surface contact for longer bit life
  • U-Flute cleans debris out for fast, efficient drilling
  • Open head design channels dust into flutes for quicker drilling
  • Hardened core helps to reduce bit breakage

Click here to see the full comparison chart and to shop for DeWalt 2 Cutter SDS Max Carbide Masonry Drill Bits

DeWalt 4 Cutter High Impact Spline Carbide Masonry Drill Bits4X - HI 4 Cutter Spline

Replacing Powers 4-X Cutter Head Spline Drill Bits

  • High Impact tip maximizes carbide surface contact for longer bit life
  • Open head design channels dust into flutes for quicker drilling
  • Longer helix four flute design expedites mill removal for quicker drilling
  • 4 cutter head to help reduce vibration

Click here to see the full comparison chart and to shop for DeWalt High Impact 4 Cutter Spline Carbide Masonry Drill Bits

DeWalt 2 Cutter Spline Carbide Masonry Drill Bits4X - HI 2 Cutter Spline

Replacing Powers Single Tip Spline Drill Bits

  • Carbide tip design maximizes carbide surface contact for longer bit life
  • U-Flute cleans debris out for fast, efficient drilling
  • Open head design channels dust into flutes for quicker drilling
  • Hardened core helps to reduce bit breakage

Click here to see the full comparison chart and to shop for DeWalt 2 Cutter Spline Carbide Masonry Drill Bits

DeWalt Premium 2 Cutter Percussion Carbide Masonry Drill BitsHD Straight - Percussion

Replacing Powers HD Straight Shank Bits

  • 2 Cutter rock carbide tip maximizes carbide surface contact for longer bit life
  • Four flute design cleans debris out for fast, efficient drilling
  • Three flats on shank eliminate bit slipping in chuck

Click here to see the full comparison chart and to shop for DeWalt Premium Percussion Carbide Masonry Drill Bits

Join Tanner at the Glass Expo Northeast™ ’17

tannernewlogo-xlarge

For Immediate Release
March 17th 2017

Tanner – Brooklyn
4302 Glenwood Road
Brooklyn, NY 11210
718-434-4500
websales@tannerbolt.com
TannerBolt.com

TANNER HAS JUST LOCKED IN IT’S SPOT AT THE GLASS EXPO NORTHEAST™ ’17

Region’s Largest Glass-Related Conference and Trade Show

Tanner has just confirmed it will be attending the Glass Expo Northeast™ ’17 –  located at Booth #506. Joining Tanner at this years Glass Expo are some of the best know companies in the industry: 3M Fall Protection, DEWALT, Powers, Champion Cutting Tools and Elco to name a few. Due to the overwhelming success in the past, the expo will be moving to a new venue this year – Hilton Long Island / Huntington Hotel in Huntington NY.

The Glass Expo Northeast™ ’17, to be held on March 30 – 31, 2017, is the largest conference and trade show dedicated to the architectural glass and metal industry. For 2017 the expo will be co-sponsored by: USGlass Magazine, Long Island Glass Association, USGNN.com and Architects’ Guide to Glass & Metal. Join industry leaders and learn about the latest industry trends and services while gaining valuable insight on how to improve your business and profitability. Plus – network with other members of the industry from across the country and view the latest products and services available today.

More than 93% of the 2015 attendees stated they would return to future expos, with more than 90%  confirming the trade show floor exceeded or met their expectations

Champion Cutting Tools will be featuring their XL5 Brute Platinum Drill Bits. XL5 Brute Platinum Drill have been proven to penetrate and drill faster than cobalt bits. The precision ground 135° split point eliminates the need for drilling pilot holes. XL5 bits break less often due to the “toughness to hardness” ratio, allowing them to flex when cobalt bits chip or snap.

Straight Shank – Heavy Duty – Black & Bright Finish – 135° Split Point – NOMO® Surface Treatment – HSS

Elco will be featuring their Flex Technology Products. Elco’s Flex Technology line of products incorporate high performance and virtual immunity to delayed embrittlement failures. These products far surpass any standard fastening formats available today. Elco Flex Technology products allow designers and system manufacturers to manage risk and enhance the performance of critical connections.

Dissimilar Metal Applications – Windows, Doors & Skylights – Building Enclosures/Envelopes (Curtain Wall Systems, Stone Facades, Insulated Metal Panels – Blast Protection Systems – Solar Panel Racking Support

Tanner is an authorized, top tier distributor of Elco, 3M Fall Protection, DEWALT, Powers and Champion Cutting Tools product lines. Our products can be found on our main website: TannerBolt.com and our brand new SBDK dedicated website: TannerContractorSupply.com.

Did You Know DeWalt 20V MAX* Tools are Compatible with the New FLEXVOLT™ 20V/60V MAX* Batteries?

The Technology That’ll Change How You Look at Cordless Power Tools

The FLEXVOLT™ battery’s ability to automatically change between two voltages gives users a serious advantage when it comes to efficiency. It’s the battery that not only powers, but improves the runtime** of  DeWalt 20V MAX* tools, so you don’t have to invest in a whole new system. When the new FLEXVOLT™ 20V/60V MAX* battery is inserted into a 20V MAX* tool, the battery automatically changes into Parallel mode.  In parallel mode, the revolutionary FLEXVOLT™ 15-cell battery can deliver up to 4X the runtime** to your current 20V MAX* tools. In this mode, three sets of five cells each are connected in parallel to give you 20V MAX* and 6.0 Ah for increased runtime.

**With FLEXVOLT battery when used with DEWALT 20V MAX* tools.

Tanner with the help from DeWalt, has compiled a list of compatible 20V MAX* tools that will work with the new FLEXVOLT™ 20V/60V MAX* batteries.

View / Download the FLEXVOLT™ Compatibility List Here

FLEXVOLT™ Compatibility List

Tanner Introduces FLEXVOLT™ – The Battery that Will Change How You Work Forever

Worlds First Battery that Automatically Changes Voltages when You Change Tools

Tanner & DEWALT Bring You Next Level Power with FLEXVOLT™

DEWALT has revolutionized the modern battery to bring you the FLEXVOLT™ battery system. The revolutionary FLEXVOLT™ battery system brings you the future of power with cordless tools unlike anything you’ve ever experienced. With a highly innovative voltage-changing battery and a lineup of groundbreaking 60V MAX* and 120V MAX* tools to match, FLEXVOLT™ tools have the power that will change the way work gets done. FLEXVOLT™ gives you the power of corded with the freedom of cordless. The full line of FLEXVOLT™ batteries and tools will be available soon for pre-order at Tanner, call us at 800-456-2658 for more information.3 Voltage Platforms in 1 Battery

20V & 60V Capabilities in One Battery

The FLEXVOLT™ battery is backwards compatible with all DEWALT 20V MAX* tools so you get up to 4x the runtime**. The FLEXVOLT™ battery is the only battery that automatically changes voltages when you change tools, so you can slide the battery into a whole new lineup of 60V MAX* and 120V MAX* tools from DEWALT. Support 3 tool platforms all with one battery! Check out Tanner’s list of compatible DEWALT 20V MAX* tools here.

Go From a Corded to a Fully Cordless Jobsite with FLEXVOLT™

Tanner with the help from DEWALT and FLEXVOLT™ want to make working on the jobsite easier and more convenient than ever. The FLEXVOLT™ battery’s ability to automatically change between two voltages gives users a serious advantage when it comes to efficiency. It’s the battery that not only powers, but improves the runtime** of DEWALT 20V MAX* tools, so you don’t have to invest in a whole new system. It’s the battery that brings the power of corded to a new lineup of 60V MAX* and 120V MAX* DEWALT tools so you can finally work on a fully cordless jobsite. This revolutionary battery will change the way things get done. Improve jobsite productivity with your own set of FLEXVOLT™ tools, available for pre-order soon at Tanner, call us at 800-456-2658 for more information.

**With FLEXVOLT™ 60V MAX* battery when used with DEWALT 20V MAX* tools

 DEWALT FLEXVOLT™ Cordless Power Tools & Accessories Offered at Tanner

  • 20V / 60V MAX* FLEXVOLT Battery – 6.0 Amp Hours of Capacity in 20V Max* Tools
    • Battery Chargers
    • Power Stations
  • 60V MAX* Cordless Circular Saw – Up to 339 Cuts Per Charge
    • Circular Saw Blades
  • 60V MAX* Cordless VSR Stud & Joist Drill – Up to 138 Holes Per Charge
    • Hole Saws
  • 60V MAX* Cordless Table Saw – Up to 302 Linear Feet Per Charge
    • Table Saw Blades
  • 60V MAX* Cordless Reciprocating Saw – Up to 158 Cuts Per Charge
    • Reciprocating Saw Blades
  • 60V MAX* Cordless Grinder – Up to 126 Cuts Per Charge
    • Flap Discs
    • Grinding Wheels
  • 120V MAX* Cordless / Corded Miter Saw – Up to 289 Cuts Per Charge
    • Miter Saw Blades
    • 120V Corded Power Supply