Tag Archives: dewalt engineered by powers

Wedge-Bolt+ / Screw-Bolt+ Screw Anchors Cross Reference Chart

Out with the Old & In with the New

In one of our previous blog posts Screw-Bolt+™ – The New Standard for Heavy Duty Screw Anchors we mention the Screw-Bolt+™ Screw Anchors will be replacing the Powers Wedge-Bolt+® Screw Anchors. While there is still a limited amount of stock left in the Wedge-Bolt+ Anchors, once this stock is depleted, you will no longer be able to purchase them. You will have to buy the new and improved Screw-Bolt+ Screw Anchors.

To make the transition easier for our customers, we made a cross-reference chart of the old Wedge-Bolt+ part numbers with the new Screw-Bolt+ part numbers, that match up the corresponding sizes and finishes. While some of the Wedge-Bolt+ Screw Anchors are still available on our website, please remember these may become unavailable any day now. If you need more information about the new Screw-Bolt+ Screw Anchors, please reference our previous Screw-Bolt+™ – The New Standard for Heavy Duty Screw Anchors blog post.

Wedge-Bolt+ to Screw-Bolt+ Screw Anchors Cross Reference Chart

View, Save & Share: Wedge-Bolt+ to Screw-Bolt+ Screw Anchors Cross Reference Chart

Screw-Bolt+™ – The New Standard for Heavy Duty Screw Anchors

High-Performance Screw Anchors

One of the newer products put out by DEWALT® Engineered by Powers™, is the Screw-Bolt+™, a high-performance Screw Anchors. These screw anchors are one piece and have a finished hex head. Screw-Bolt+™ Anchors are very user friendly, with a simple installation process, easy identification, and are fully removable. They feature a patented thread design that is designed to be used with standard ANSI drill bits, which reduces installation torque and enhances productivity by reducing installation time. The heavy-duty steel threads tap into the drilled hole during installation to provide a keyed engagement and allow for reduced edge and spacing distances.

*NEW PRODUCT UPDATE* – Flat Head Screw-Bolt+™ Screw Anchors

The NEW FlatHhead Screw-Bolt+ Screw Anchors are offered in 1/4″, 3/8″ & 1/2″ diameter, with lengths ranging from 2-1/2″ – 5″. Manufactured from carbon steel with a bright zinc plated finish.

Dewalt-Single-Flat-ScrewboltPlus-New-Banner

Available in 2 finishes…ScrewBolt+ Installation

Screw-Bolt+™ Screw Anchors are Suitable for Installation in..

  • Normal-weight concrete
  • Sand-lightweight concrete
  • Concrete over steel deck
  • Concrete masonry
  • Solid clay brick

Will the Screw-Bolt+™ Be Replacing Any Products?ScrewBolt+

Yes, the Screw-Bolt+™ Screw Anchors will be replacing (2) lines of Powers products: Wedge-Bolt® Screw Anchors and Wedge-Bolt+® Screw Anchors. There is still a limited amount of stock available for the (2) product lines, but once the stock is depleted there will be no more made. In regards to the 316 Stainless Steel Wedge-Bolt™, this product has transitioned to the DEWALT® Engineered by Powers™ brand and will continue to be manufactured.

Key Features & Benefits of the Screw-Bolt+™ Screw Anchors

  • Designed for standard ANSI tolerance drill bitsScrewBolt+ Head Marking
  • Patented thread design offers low installation torque
  • Tough threads for tapping high strength concrete
  • Ratchet teeth on underside of hex washer head lock against the fixture
  • Can be installed closer to the edge than traditional expansion anchors
  • Fully removable and reinstallable in same hole
  • Fast installation with powered impact wrench
  • Diameter, length and identifying marking stamped on head of each anchor
  • One-piece, finished head design

Screw-Bolt+™ Screw Anchor Approvals & Listings

  • International Code Council, Evaluation Service (ICC-ES), ESR-3889 for concrete. Code compliant with 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC, and 2009 IRC
  • Tested in accordance with ACI 355.2 and ICC-ES AC193 for use in structural applications in concrete under the design provisions of ACI 318 (Strength Design Method)
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)
  • Evaluated and qualified by an accredited independent testing laboratory for reliability against brittle failure, e.g. hydrogen embrittlement

ScrewBolt+ Approvals Listings

Screw-Bolt+™ – User Approved, Performance Guaranteed

The New Standard for Rod Hanging Applications

HangerMate Banner

HangerMate®+ Rod Hanging System for Concrete, Wood & Steel

By DEWALT® Engineered by Powers™

HangerMate®+ Anchors are the newest line of rod hanging anchors developed by DEWALT® Engineered by Powers™. The HangerMate®+ Anchors are a one piece, steel anchor designed for rod hanging applications such as fire protection systems, ventilation systems, electrical conduit, pipe hanging and cable trays. HangerMate®+ Anchors come in a variety of styles designed for applications in concrete, steel & wood. Read on to learn more about the different styles and applications these rod hanging anchors come in. Shop now for all of the HangeMate+ product featured below at TannerBolt.comHangerMate+ Products

Applications for HangerMate®+ Anchors:

  • Fire Sprinkler Pipes
  • Ventilation Systems
  • Cable Trays
  • Suspended Ceilings
  • Overhead Utilities
  • Lighting Systems

HangerMate®+ Anchors for Concrete Applications

The Concrete HangerMate®+ Anchors have been tested and qualified for use in cracked concrete and seismic conditions. They require a 1/4″ ANSI masonry bit for installation, accept 1/4″ & 3/8″ diameter threaded rods and are also available in a 3/8″ male thread version. Concrete HangerMate®+ Anchors  are available in 4 different styles: Internally Threaded, Externally Threaded, Pivot – Angled Applications & Suspender – Dual Directional.

  • THREAD PROFILE – low torque, fast installation, full concrete engagement
  • STANDARD 1/4″ BIT – no need for specialty bit for installationConcrete HangerMate+
  • HARDENED STEEL – installs in hard concrete and remains ductile
  • THREADED ROD – available in 1/4″ or 3/8″ rod sizes
  • EXTERNAL 3/8″ THREAD – for attaching directly to anchor

Approvals & Listings:Faster Installation

  • International Code Council, Evaluation Service (ICC-ES). ESR-3889 code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC.
  • FM Approvals (FM) – (see listing for applicable sizes and types).
  • Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17 and ACI-318-11/08 Appendix D.
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors).
  • Evaluated and qualified by an accredited independent testing laboratory for reliability against brittle failure, e.g. hydrogen embrittlement.

HangerMate®+ Anchors for Steel Applications

The Steel HangerMate®+ Anchors require a 1/4″ ANSI masonry bit for installation and accept 1/4″ & 3/8″ diameter threaded rods. They are available in 5 different styles: Vertical Applications, Horizontal Applications, Pivot – Angle Applications, Suspender – Dual Directional & Acoustical Ceiling Screw Eyelet.

  • SELF-DRILLING POINT – eliminates pre-drillingSteel HangerMate+
  • ONE PIECE DESIGN – provides solid connection from steel to threaded rod
  • SELF-TAPPING THREADS – low torque to install
  • SIDE MOUNT OPTION – for horizontal applications
  • STEEL DRIVER – spin off feature helps reduce over driving

Approvals & Listings:

  • International Code Council, Evaluation Service (ICC-ES). ESR code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, 2009 IBC/IRC, and 2006 IBC/IRC – PENDING.Steel HangerMate+ Comparison
  • FM Approvals (FM) – (see listing for applicable sizes and types).
  • Pipe Hangers components for automatic sprinkler systems – File No.(PENDING).
  • Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17.
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)

HangerMate®+ Anchors for Wood Applications

The Wood HangerMate®+ Anchors require a 1/4″ ANSI masonry bit for installation and accept 1/4″, 3/8″ & 1/2″ diameter threaded rods. They are available in 5 different styles: Vertical Applications, Horizontal Applications, Pivot – Angle Applications, Suspender – Dual Directional & Acoustical Ceiling Screw Eyelet.Wood HangerMate+

  • TYPE 17 GIMLET – easy material removal, no pre-drilling required
  • SINGLE PIECE DESIGN – allows removal and adjustment
  • SIDE MOUNT OPTION – for horizontal applications
  • WOOD DRIVER – spin off feature helps reduce over drivingReduced Splitting

Approvals & Listings:

  • International Code Council, Evaluation Service (ICC-ES). ESR code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, 2009 IBC/IRC, and 2006 IBC/IRC – PENDING.
  • FM Approvals (FM) – (see listing for applicable sizes and types).
  • Pipe Hangers components for automatic sprinkler systems – File No.(PENDING).
  • Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17.
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors).

HangerMate®+ Pivot Specialty Rod Hanging AnchorsPivot HangerMate+

  • Multiple threads designed for concrete, wood and steel
  • Rotational head almost 90 degrees of rotation for flexible positioning
  • Engineered steel hardened steel designed to cut through hard materials
  • Torx drive full engagement when driving through tough material

HangerMate®+ Suspender™ Specialty Rod Hanging AnchorsSuspender HangerMate+

  • Multiple threads different thread and point styles
  • Twin lead thread greater thread engagement (concrete & wood)
  • Dual directional thread one part for vertical or horizontal application

HangerMate®+ Anchors Will Be Replacing..

HangerMate®+ Anchors will be replace the following lines of rod hanging anchors from Powers & Elco.

  • Vertigo™ (Powers)
  • Vertigo+™ (Powers)
  • HangerMate® (Elco)

Find the Right Adhesive Anchoring System for Your Job

Adhesive Anchoring Systems from DeWalt® Engineered by Powers™

The Bond that Holds the System Together

With 3 levels of performance, these new adhesive anchors allow you the choice from the cost efficient options all the way to the heavy duty working load options, that will give you the highest level of performance. All 3 levels of the new adhesive anchoring systems from DeWalt® Engineered by Powers™ will provide you with reliable installation each and every time. Read on to learn more about each of these new lines of adhesive anchors. From the High Performance to the Basic lines, we want to help you find the right adhesive for your job.

Looking for ICC-ES & Seismic Approved Adhesive Anchors?

When looking for ICC-ES and Seismic approved adhesive anchors, be sure to check out the High Performance and Standard Adhesive Anchoring Systems. The AC200+™,  PURE110+®, AC100+ GOLD® are all ICC-ES and Seismic approved adhesive anchoring systems. With the PURE50+™ only being ICC-ES approved.

High Performance Adhesives

AC200+™ – Acrylic Injection Adhesive Anchoring SystemAC200

  • ICC-ES APPROVED – approved for cracked and uncracked concrete
  • SEISMIC – approved for seismic design categories A-F
  • BOND STRENGTH – high performance
  • CONVENIENT – wide installation temperature range with small edge distances and spacings
  • EASY TO USE – fast hardening adhesive; reliable installation and easy to dispense
  • CLEANING – hand or power brush clean; or use the Hollow Drill Bit / DustX+™ cleaning method
  • EMBEDMENT – depths ranging from 4d to 20d

AC200 Listings


PURE110+® – Epoxy Injection Adhesive Anchoring SystemPure110

  • ICC-ES APPROVED – approved for cracked and uncracked concrete, and seismic applications
  • ICC-ES APPROVED – for post-installed rebar
  • SEISMIC – approved for seismic design categories A-F
  • BOND STRENGTH – high bond strength at 110° F; no reduction in bond strength due to service temperature shifts
  • VERSATILE – dispensing options – 1:1 and 3:1
  • CONVENIENT – easy hole cleaning methods and fast curing times

Pure110 Listings


Standard Adhesives

AC100+ GOLD® – Vinylester Injection Adhesive Anchoring SystemAC100gold

  • ICC-ES APPROVED – approved for cracked and uncracked concrete, and grouted or hollow masonry
  • SEISMIC – approved for seismic design categories A-F
  • LOW TEMPERATURE DISPENSING – approved for dispensing down to 14° F
  • VERSATILE – low odor formula with quick cure time
  • DOT – wide range of listings; 27 states
  • CERTIFIED TO NSF/ANSI 61 – drinking water system components

AC100Gold Listings


PURE50+™ – Epoxy Injection Adhesive Anchoring Systempure50

  • ICC-ES APPROVED – approved for cracked and uncracked concrete
  • EVALUATED AND RECOGNIZED – for long and short term loading
  • INSTALLATION TEMPERATURE – can be installed in a wide range of base material temperatures
  • TESTED – for creep resistance
  • DESIGNED – specifically with road, bridge and concrete contractors in mind
  • EVALUATED AND RECOGNIZED – for freeze/thaw performance

Pure50 Listings


Basic Adhesives

AC50™ – Adhesive Anchoring SystemAC50CURES – down to 5° F

  • INSTALLATION TEMPERATURE – installs in a wide range of material temperatures
  • EVALUATED AND RECOGNIZED – for long and short term loading

AC50 Listings


PURE GP – Epoxy Injection Adhesive Anchoring SystemPureGP

  • DESIGNED – for use with threaded rod and rebar

PureGP Listings