M.K. Morse rolls out its latest metal cutting innovation, the CTR Carbide Tipped Metal Cutting Reciprocating Saw Blade – designed with the professional in mind. The CTR Reciprocating Saw Blades cut the most difficult materials quicker and cleaner, far out performing the competition. For thick metal cutting applications between 3/16″ and 1/2″, there is no better choice than the CTR Carbide Tipped Reciprocating Saw Blades from M.K. Morse.
Lasts Longer, Cuts Faster
More Cost Effective – Outlasts bi-metal reciprocating blades in tough metals. WC Grade Carbide Tips – Long life and superior cutting performance in stainless steel and other tough metals. Precision Ground Carbide Teeth – Less vibration, faster cutting, longer life than traditional bi-metal reciprocating blades in tough metals. 1″ x .050 Blade – Straighter cuts and less vibration with reduced fatigue for the operator. Universal Tang – Fits all standard reciprocating saws.
Applications: Cast Iron, Threaded Rod, EMT Conduit, Stainless Steel, Steel Plate, Ferrous Metal, Rubber, Steel Studs, Rebar, Black Iron Pipe, Angle Iron, Metal Alloys
Target Customers: Plumbing Contractors, Electrical Contractors, HVAC Contractors, General Contractors, Iron Workers, Sheet Metal Contractors, Fire & Rescue, Metal Building Contractors, Steel Framing Contractors, Plant Maintenance, Mechanical Contractors
More Holes, Cleaner Holes, Pull Out Quicker and Safer, Lower Cost Per Hole
Champion’s Carbide Tipped Hole Cutters are made with ultra-hard tungsten carbide teeth and each component has been specially developed to perform well during each and every cut. The ejector spring in each hole cutter is designed to automatically eject the slug to save time while drilling multiple holes. A built in safety feature on each hole cutter is the safety collar stop, this prevents over penetration for safer and faster operation. As an added bonus there is no added cutting oil cost or clean up required. Champions Carbide Tipped Hole Cutters are a great cost effective alternative to bi-metal holesaws.
CT3 Carbide Tipped Hole Cutters feature a 1/4″ hex shank with three carbide tips, a pilot drill, and ejector spring. Engineered for cutting stainless steel, sheet metal, and tubing, up to 1/8” with fast, clean cuts every time. They are the ideal solution for drilling holes in sheet metal when using a cordless drill because of their ability to cut quickly and use very little power.
CT3 Carbide Tipped Hole Cutter
Special tungsten carbide teeth
• Excellent wear and heat resistance
• Cuts stainless steel and tough alloys
One-piece construction
• No assembly required
• Stable accurate drilling
Ejector spring
• Ejects the slug, thus saving time
Safety collar stop
• Prevents over penetration for safer, faster operation.
Applications: Junction / Switch Boxes, Metal Studs, Electrical Appliances, Lighting Fixtures, Auto Body Repair, Truck / Trailer Frames, and Ductile Pipe.
CT5 Carbide Tipped Hole Cutters have a new design for longer life and faster cutting. Sizes: 9/16” to 2-5/8” have a 3/8” shank, while sizes: 2-3/4” to 5” have a 1/2” shank. Engineered for cutting steel plate, iron, aluminum, copper, cast iron, stainless steel, fiberglass, and plastics up to 3/16” thick. They are a cost-effective alternative to bi-metal hole saws, making them the perfect portable tool for the professional electrician, plumber, mechanic, and contractor.
CT5 Carbide Tipped Hole Cutter
Special tungsten carbide teeth with NEW carbide tip pocket
• Excellent wear and heat resistance
• Cuts stainless steel and tough alloys
• Tip pocket for quicker chip extraction
One-piece construction
• No assembly required
• Stable accurate drilling
Strong, heat resistant ejector spring
• Ejects the slug saving time
NEW stepped pilot drill
• Reduces tip impact
Safety collar stop
• Prevents over penetration for safer, faster operation.
Applications: Junction / Switch Boxes, Metal Studs, Appliances, Auto Body Repair, and Truck Body Repair.
CT7 Carbide Tipped Hole Cutters feature two sets of three cutting blades, each with different geometries. This unique system balances the cutting forces enabling rapid, smooth drilling with better control. Sizes: 9/16” to 3” have a 3/8” shank, while sizes: 3-1/4” to 4-1/2” have a 1/2” shank. Engineered for cutting steel plate, iron, aluminum, copper, cast iron, stainless steel, fiberglass, and plastics up to 1” thick. They are a cost-effective alternative to bi-metal holesaws, making them the perfect portable tool for the professional electrician, plumber, mechanic, and contractor.
CT7 Carbide Tipped Hole Cutters
Special tungsten carbide teeth
• Excellent wear and heat resistance
• Cuts stainless steel and tough alloys
One piece construction
• No assembly required
• Stable accurate drilling
Ejector spring
• Ejects the slug saving time
Safety collar stop
• Prevents over penetration for safer, faster operation.
Applications: Junction / Switch Boxes, Metal Studs, Appliances, Auto Body Repair, Truck / Trailer Frames, and Ductile Pipe.
CT9 Carbide Tipped Hole Cutters feature a 3/8” shank with triple-cutting geometry for smooth, fast cutting. This unique geometry delivers rapid chip removal and better overall control. The CT9 hole cutters have a 2” depth for drilling thick materials. They are recommended for drilling steel door lockset and deadbolt holes. The 2-1/8” cutter is designed for doorknob installation, while the 1-1/2” cutter is designed for deadbolt installation.
CT9 Carbide Tipped Hole Cutters
Special tungsten carbide teeth
• Excellent wear and heat resistance
• Cuts stainless steel and tough alloys
One piece construction
• No assembly required
• Stable accurate drilling
Extra length tool body
• For extra length of cutting
Champion® CT3, 5, 7 and 9 carbide tipped hole cutters are the ideal portable tools for the professional electrician, plumber, general contractor and door installer. Carbide tipped hole cutters are extremely productive tools that cut faster and last longer than conventional bi-metal hole saws. For instance, a single CT3 will cut up to 150 holes in 1/8″ thick stainless steel.
The choice for drilling lockset and deadbolt holes in steel doors.
• 2” depth for drilling thick materials.
• 3/8” shanks.
• 2-1/8” designed for door knob, 1-1/2”
designed for deadbolt.
CT3– The solution for drilling holes in sheet metal up to 1/8” thick.
CT5– The cutting tool for ferrous/non-ferrous materials up to 3/16”
thick.
CT7– The best cutting tool for drilling holes up to 1” thick ferrous and non-ferrous materials.
Want answers to your questions about fasteners, security screws, and tools? Stop searching. Tanner's resource center gives you fastener answers faster.
