Tag Archives: adhesive anchors

Adhesives & Sealants for Work & Security

Wide Variety of Adhesives & Sealant Available

Adhesives & Sealants come in a wide variety styles, each with it’s own specific applications and uses. General purpose for everyday use, heavy duty anchoring systems for industrial applications and tamper resistant compounds used for security reasons. With the growing number of adhesives & sealants out there, it can be easy to mistakenly use one of these for the wrong use. Read on to learn more about some of these adhesives & sealants that Tanner has to offer its customers and learn more about the specific uses and applications they were made for.

Security Sealants

DynaPoxy™ EP-1200DynaPoxy EP-1200

“Pick-Proof” Rigid, Two-Part, Epoxy Resin Compound

DynaPoxy™ EP-1200 is a “pick-proof” rigid, two-part, epoxy resin compound. It has been specially designed to be an excellent joint sealant for high security areas of prisons and other security areas. DynaPoxy™ EP-1200 can also be used as a structural adhesive for vertical & overhead bonding, grouting and for bolt embedment, due to its high compressive strength and non-sag properties. It is packaged in a 1-1/2 gallon unit including the Base and Activator. Color Packs are available separately for purchase.

  • Outstanding adhesion to similar or dissimilar materials, particularly in concrete and metal.
  • Use in high security areas where a harder material is required and flexibility is less important.

DynaFlex™ SC

Tamper-Resistant, One-Part, Non-Sag Elastometric STPU

DynaFlex™ SC is a tamper resistant security sealant. DynaFlex™ SC is more flexible than epoxy in composition and is designed to achieve high tensile and tear strengths, abrasion resistance and an average ultimate hardness of at least 55, yet withstand 25% total joint movement. This is a unique one-part, non-sag, tamper-resistant elastometric STPU joint sealant with many of the strengths of two-component security sealants but with the user-friendly ease-of application properties of a one component sealant.DynaFlex SC

  • This rugged but flexible sealant is ideally suited for use in institutional and correctional complex security installations.
  • Performs equally well in other public buildings and facilities where ordinary sealants are easily damaged or torn out by tampering and acts of vandalism.

Heavy Duty Adhesive Anchoring Systems

AC200+™

Two-Component, Acrylic Injection Adhesive Anchoring SystemAC200+

The AC200+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The AC200+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete base materials.

  • Code Listed: ICC-ES ESR-4027 for cracked and uncracked concrete
  • Evaluated and recognized for freeze/thaw performance
  • Cartridge design allows for multiple uses using extra mixing nozzles
  • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
  • Evaluated and recognized for long term and short term loading

Pure110+

Two-Component, Epoxy Adhesive Anchoring SystemPure 110+

The Pure110+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The Pure110+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete and masonry base materials. Pure110+ has the same bond strength at room temperature and at 110°F.

  • Code Listed: ICC-ES ESR-3298 for cracked and uncracked concrete
  • Evaluated and recognized for freeze/thaw performance
  • Cartridge design allows for multiple uses using extra mixing nozzles
  • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
  • Evaluated and recognized for long term and short term loading
  • Same bond strength at room temperature and at 110ºF.

AC100+ Gold

Two-Component, Vinylester Adhesive Anchoring SystemAC100+ Gold

The AC100+ Gold is a two-component vinylester adhesive anchoring system that meets IBC for strength design of concrete anchors. Ideal for cold and moderate weather applications and works well in damp/wet holes. The AC100+ Gold is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials and can also be used to anchor into hollow masonry materials using screen tubes.

  • Code Listed: ICC-ES ESR 2582 for cracked and uncracked concrete
  • Designed for use with threaded rod and reinforcing bar hardware elements
  • Consistent performance in low and high strength concrete (2,500 to 8,500 psi)
  • Evaluated and recognized for freeze/thaw performance
  • Evaluated and recognized for a range of embedments in interior and exterior applications
  • Versatile low odor formula with quick cure time
  • Evaluated and recognized for long term and short term loading
  • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
  • Cartridge design allows for multiple uses using extra nozzles

General Purpose Bonding Adhesive / Sealants

Powerstick

One-Component, Universal Adhesive / SealantPower Stick

PowerStick is a non hazardous, virtually odorless, one-component universal adhesive and sealant. PowerStick is the first professional grade product on the market that delivers high bond strength along with superior flexibility. It features a high aggressive initial tack, and will not react with the substrate when installed. It will not shrink and can even be applied to wet surfaces. PowerStick does not contain solvents, isocyanates, and is VOC compliant, which allows it to be shipped without any special shipping procedures. Cleaning up is easy with just soap and warm water or mineral spirits.

  • Elastic properties – can be used as a sealant for filling cracks and joints
  • No harmful components, solvent free and is VOC compliant (no isocyanates)
  • Can be shipped without restriction and is environmentally friendly
  • Inert formula will not interact with substrates such as metal trim, silver lining on mirrors, or foam insulation board
  • Works on virtually every base material
  • MS formula is not affected by water, moisture, or mildew during service
  • UV resistant formula is suitable for outdoor use
  • Superior initial tack
  • Accepts primer and paint unlike silicone based sealants

 

Find the Right Adhesive Anchoring System for Your Job

Adhesive Anchoring Systems from DeWalt® Engineered by Powers™

The Bond that Holds the System Together

With 3 levels of performance, these new adhesive anchors allow you the choice from the cost efficient options all the way to the heavy duty working load options, that will give you the highest level of performance. All 3 levels of the new adhesive anchoring systems from DeWalt® Engineered by Powers™ will provide you with reliable installation each and every time. Read on to learn more about each of these new lines of adhesive anchors. From the High Performance to the Basic lines, we want to help you find the right adhesive for your job.

Looking for ICC-ES & Seismic Approved Adhesive Anchors?

When looking for ICC-ES and Seismic approved adhesive anchors, be sure to check out the High Performance and Standard Adhesive Anchoring Systems. The AC200+™,  PURE110+®, AC100+ GOLD® are all ICC-ES and Seismic approved adhesive anchoring systems. With the PURE50+™ only being ICC-ES approved.

High Performance Adhesives

AC200+™ – Acrylic Injection Adhesive Anchoring SystemAC200

  • ICC-ES APPROVED – approved for cracked and uncracked concrete
  • SEISMIC – approved for seismic design categories A-F
  • BOND STRENGTH – high performance
  • CONVENIENT – wide installation temperature range with small edge distances and spacings
  • EASY TO USE – fast hardening adhesive; reliable installation and easy to dispense
  • CLEANING – hand or power brush clean; or use the Hollow Drill Bit / DustX+™ cleaning method
  • EMBEDMENT – depths ranging from 4d to 20d

AC200 Listings


PURE110+® – Epoxy Injection Adhesive Anchoring SystemPure110

  • ICC-ES APPROVED – approved for cracked and uncracked concrete, and seismic applications
  • ICC-ES APPROVED – for post-installed rebar
  • SEISMIC – approved for seismic design categories A-F
  • BOND STRENGTH – high bond strength at 110° F; no reduction in bond strength due to service temperature shifts
  • VERSATILE – dispensing options – 1:1 and 3:1
  • CONVENIENT – easy hole cleaning methods and fast curing times

Pure110 Listings


Standard Adhesives

AC100+ GOLD® – Vinylester Injection Adhesive Anchoring SystemAC100gold

  • ICC-ES APPROVED – approved for cracked and uncracked concrete, and grouted or hollow masonry
  • SEISMIC – approved for seismic design categories A-F
  • LOW TEMPERATURE DISPENSING – approved for dispensing down to 14° F
  • VERSATILE – low odor formula with quick cure time
  • DOT – wide range of listings; 27 states
  • CERTIFIED TO NSF/ANSI 61 – drinking water system components

AC100Gold Listings


PURE50+™ – Epoxy Injection Adhesive Anchoring Systempure50

  • ICC-ES APPROVED – approved for cracked and uncracked concrete
  • EVALUATED AND RECOGNIZED – for long and short term loading
  • INSTALLATION TEMPERATURE – can be installed in a wide range of base material temperatures
  • TESTED – for creep resistance
  • DESIGNED – specifically with road, bridge and concrete contractors in mind
  • EVALUATED AND RECOGNIZED – for freeze/thaw performance

Pure50 Listings


Basic Adhesives

AC50™ – Adhesive Anchoring SystemAC50CURES – down to 5° F

  • INSTALLATION TEMPERATURE – installs in a wide range of material temperatures
  • EVALUATED AND RECOGNIZED – for long and short term loading

AC50 Listings


PURE GP – Epoxy Injection Adhesive Anchoring SystemPureGP

  • DESIGNED – for use with threaded rod and rebar

PureGP Listings

AC100+Gold Low Temperature Installation News

Tanner distributes AC100+Gold, manufactured by Powers Fasteners, an excellent adhesive anchoring product used to bond threaded rod and reinforcing bar into solid concrete and masonry base materials. AC100+  is an all weather product, with the distinction of being an excellent performer in cold weather. New testing done recently shows no load reduction at 23 degrees fahrenheit. Powers and Hilti are the only two companies with ICC-ES listed cold weather acrylic adhesives, tested with a valid ICC-ES report available.

AC100+Gold Cold Weather Installation Report pdf