HangerMate Banner

HangerMate®+ Rod Hanging System for Concrete, Wood & Steel

By DEWALT® Engineered by Powers™

HangerMate®+ Anchors are the newest line of rod hanging anchors developed by DEWALT® Engineered by Powers™. The HangerMate®+ Anchors are a one piece, steel anchor designed for rod hanging applications such as fire protection systems, ventilation systems, electrical conduit, pipe hanging and cable trays.

 

HangerMate®+ Anchors come in a variety of styles designed for applications in concrete, steel & wood. Read on to learn more about the different styles and applications these rod hanging anchors come in. Shop now for all of the HangeMate+ product featured below at TannerBolt.com.

FREE Rebar Cutter w/Purchase


HangerMate+ Products

Applications for HangerMate®+ Anchors:

  • Fire Sprinkler Pipes
  • Ventilation Systems
  • Cable Trays
  • Suspended Ceilings
  • Overhead Utilities
  • Lighting Systems

HangerMate®+ Anchors for Concrete Applications

The Concrete HangerMate®+ Anchors have been tested and qualified for use in cracked concrete and seismic conditions. They require a 1/4″ ANSI masonry bit for installation, accept 1/4″ & 3/8″ diameter threaded rods and are also available in a 3/8″ male thread version. Concrete HangerMate®+ Anchors  are available in 4 different styles: Internally Threaded, Externally Threaded, Pivot – Angled Applications & Suspender – Dual Directional.

  • THREAD PROFILE – low torque, fast installation, full concrete engagement
  • STANDARD 1/4″ BIT – no need for specialty bit for installationConcrete HangerMate+
  • HARDENED STEEL – installs in hard concrete and remains ductile
  • THREADED ROD – available in 1/4″ or 3/8″ rod sizes
  • EXTERNAL 3/8″ THREAD – for attaching directly to anchor

Approvals & Listings:Faster Installation

  • International Code Council, Evaluation Service (ICC-ES). ESR-3889 code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC.
  • FM Approvals (FM) – (see listing for applicable sizes and types).
  • Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17 and ACI-318-11/08 Appendix D.
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors).
  • Evaluated and qualified by an accredited independent testing laboratory for reliability against brittle failure, e.g. hydrogen embrittlement.

HangerMate®+ Anchors for Steel Applications

The Steel HangerMate®+ Anchors require a 1/4″ ANSI masonry bit for installation and accept 1/4″ & 3/8″ diameter threaded rods. They are available in 5 different styles: Vertical Applications, Horizontal Applications, Pivot – Angle Applications, Suspender – Dual Directional & Acoustical Ceiling Screw Eyelet.

  • SELF-DRILLING POINT – eliminates pre-drillingSteel HangerMate+
  • ONE PIECE DESIGN – provides solid connection from steel to threaded rod
  • SELF-TAPPING THREADS – low torque to install
  • SIDE MOUNT OPTION – for horizontal applications
  • STEEL DRIVER – spin off feature helps reduce over driving

Approvals & Listings:

  • International Code Council, Evaluation Service (ICC-ES). ESR code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, 2009 IBC/IRC, and 2006 IBC/IRC – PENDING.Steel HangerMate+ Comparison
  • FM Approvals (FM) – (see listing for applicable sizes and types).
  • Pipe Hangers components for automatic sprinkler systems – File No.(PENDING).
  • Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17.
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)

HangerMate®+ Anchors for Wood Applications

The Wood HangerMate®+ Anchors require a 1/4″ ANSI masonry bit for installation and accept 1/4″, 3/8″ & 1/2″ diameter threaded rods. They are available in 5 different styles: Vertical Applications, Horizontal Applications, Pivot – Angle Applications, Suspender – Dual Directional & Acoustical Ceiling Screw Eyelet.Wood HangerMate+

  • TYPE 17 GIMLET – easy material removal, no pre-drilling required
  • SINGLE PIECE DESIGN – allows removal and adjustment
  • SIDE MOUNT OPTION – for horizontal applications
  • WOOD DRIVER – spin off feature helps reduce over drivingReduced Splitting

Approvals & Listings:

  • International Code Council, Evaluation Service (ICC-ES). ESR code compliant with the 2015 IBC/IRC, 2012 IBC/IRC, 2009 IBC/IRC, and 2006 IBC/IRC – PENDING.
  • FM Approvals (FM) – (see listing for applicable sizes and types).
  • Pipe Hangers components for automatic sprinkler systems – File No.(PENDING).
  • Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14, Chapter 17.
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors).

HangerMate®+ Pivot Specialty Rod Hanging AnchorsPivot HangerMate+

  • Multiple threads designed for concrete, wood and steel
  • Rotational head almost 90 degrees of rotation for flexible positioning
  • Engineered steel hardened steel designed to cut through hard materials
  • Torx drive full engagement when driving through tough material

HangerMate®+ Suspender™ Specialty Rod Hanging AnchorsSuspender HangerMate+

  • Multiple threads different thread and point styles
  • Twin lead thread greater thread engagement (concrete & wood)
  • Dual directional thread one part for vertical or horizontal application

HangerMate®+ Anchors Will Be Replacing..

HangerMate®+ Anchors will be replace the following lines of rod hanging anchors from Powers & Elco.

  • Vertigo™ (Powers)
  • Vertigo+™ (Powers)
  • HangerMate® (Elco)