The Importance of Being Cool

 

For higher torque, lower rpm circular saws, MK Morse Metal Devil™ metal cutting saw blades in different configurations are most appropriate to handle different materials, such as steel, thin steel, aluminum, stainless steel and steel studs. Important differences between blade configurations are the number of teeth on the blade, shape of teeth and the carbide grade. Even differences engineered into the plate help provide the longest life possible from both the blade and saw and minimize user fatigue.

These metal cutting circular saw blades provide better cutting solutions than those traditionally used. Metallurgy of the carbide tips mean there is minimal heat transferred to the inner plate. These blades move through metal up to five times faster than traditional cutting methods with minimal noise, sparks, and heat. You can touch the metal the instant the cut is finished, it’s that cool.

Morse Metal Devil saw blades will work on any professional quality circular saw. However they reach their full potential when used on specially constructed metal-cutting circular saws. These metal cutting saws utilize unique motors allowing them to maintain higher torque while cutting through tough metals. Metal cutting saws are also safer to use since they prevent chips from flying and have special chip collection chambers.

The combined effect is a more productive day.

Metal Devil Carbide Tipped Circular Saw Blades pdf

35-metal-devil-circular-saw-blades_s

 

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *