Looking for Quality & Reliability Fasteners – Choose Simpson Strong-Tie

Simpson Strong-Tie Self-Drilling Screws

Driven to Exceed Expectations

In the vast, extremely competitive fasteners industry, Simpson Strong-Tie stands above the rest. Simpson Strong-Tie’s top priority is to deliver high quality and reliable products that their customers can put their trust in. This is why each production of fasteners is put through rigorous tests to ensure their fasteners can handle higher loads, resist corrosion and make installation more efficient. Due to the dedication that Simpson puts into the production of their products is why Tanner is proud to be able to offer these high quality products to our customers. Read on to learn more about some of our latest additions to our ever growing fastener inventory.

Latest Self-Drilling Additions

Strong-Drive® Self-Drilling X Metal Screws

*Collated Option Also Available*

Strong-Drive® Self-Drilling X Metal Screws are commonly used for fastening steel decking to structural steel, steel stitching (“side-lap” stitching) and cold-formed steel framing.

  • 5/16″ Hex Head
  • Drill Point
  • Hex-Washer HeadStrong-Drive-Self-Drilling-X-Metal-Screws
  • Available in Straight Collation

Codes & Listings

  • ICC-ES ESR-3006
  • IAPMO UES ER-326
  • State of Florida FL16937
  • City of Los Angeles RR25670
  • City of Los Angeles RR26009
  • FM Approval 3045651 & 3050714 (XU only)
  • ASTM C1513 Compliant
  • SDI DDM03 Appendix VII

Warnings: Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use this product in dry, interior, and noncorrosive environments only.


Strong-Drive® PPSD SHEATHING-TO-CFS Screws

*Collated Option Also Available*

Strong-Drive® PPSD SHEATHING-TO-CFS Structural Screws are used for fastening wood subfloor/sheathing to cold-formed steel. (#8 — maximum thickness: 54 mil / 16 ga.; #10 and #12 — maximum thickness: 97 mil / 12 ga.)

  • Flat Head with Nibs for Easier Countersinking
  • #3 Square Drive
  • Fine ThreadsStrong-Drive-PPSD-SHEATHING-TO-CFS-Screws
  • Pilot Point
  • #8 & #10 Screws Meet Minimum Head Diameter Requirement Per AISI S213-07, Lateral Design Standard
  • Quik Guard® & Yellow Zinc Coating
  • Available in Curved Collation

Codes & Listings

  • ICC-ES ESR-3006
  • City of Los Angeles RR25670
  • ASTM C1513 Compliant

Warnings: Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use this product in dry, interior, and noncorrosive environments only.


CBSDQ Sheathing-to-CFS Screws (Collated)

CBSDQ Sheathing-to-CFS Screws are used for securing sheathing to cold-formed steel (recommended thicknesses: 16 and 18 ga.).

  • Ribbed Flat Head with Nibs for Easy Countersinking
  • #2 Undersized Square Drive
  • #2 Drill Point with Wings
  • Quik Guard® CoatingCBSDQ-Sheathing-to-CFS-Screws
  • Curved collation

Codes & Listings

  • City of Los Angeles RR25670
  • ASTM C1513 Compliant
  • #8 Screws Meet Minimum Head Diameter Requirement Per AISI S213-07, Lateral Design Standard

Warnings: Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use this product in dry, interior, and noncorrosive environments only.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *