Learn More About the NEW Sliding Beam Anchors from 3M™

Work confidently with added mobility of the NEW Sliding Beam Anchors from 3M™. These new sliding beam anchors glide effortlessly behind you while you work. Once you secure these beam anchors to the beam using the redesigned, integrated adjustment buttons, simply connect your Self-Retracting Lifeline (SRL) or Lanyard to the D-Ring and you’re ready to work safely.

NEW 3M™ DBI-SALA® Sliding Beam Anchors

Complete mobility is as critical as your safety, while working at heights. With the new 3M™ DBI-SALA® Sliding Beam Anchors you get both.

  • Hands-Free Mobility
    • 360-degree swiveling D-ring optimizes your mobility on the beam3M DBI-SALA Sliding Beam Anchor
  • Visible Adjustability
    • Dual ratcheting adjustment buttons are accessible above the beam, while locking mechanism is located on the side to reduce accidental engagement
  • Easy Pad Replacement
    • Snap-in design of wear pads allows them to be replaced quickly in the field
  • Rugged Durability
    • Corrosion-resistant construction meets ANSI standards for weather, environmental and storage conditions
  • Lightweight
    • Compact size and lightweight materials
  • Compliant
    • Meets ANSI Z359.18 Anchorage Connector standard; OSHA 420 lb./ANSI 310 lb. ratings

Applications: Bridge work, Buildings, Warehouses, Arenas & Parking ramps

NEW 3M™ Protecta® Sliding Beam Anchors

While working at heights, having a durable, high-strength anchorage point, provides you with the confidence that you have the protection you need. With the new 3M™ Protecta® Sliding Beam Anchor you get just that.

  • Versatile Size Range
    • Fits beam flanges 3-1/2 in. to 14 in. (9 cm-35.5 cm) wide and up to 1-1/4 in. (3.2 cm) thick3M Protecta Sliding Beam Anchor
  • Fully Adjustable
    • Integrated dual ratcheting adjustment system slides to fit snugly against the beam
  • Replaceable Wear Pads
    • Eliminate metal-to metal contact and extend the usability of the product
  • Built to Last
    • Rugged, corrosion resistant construction enhances longevity
  • Guarded Locking Mechanism
    • Located on the bottom to reduce chance of accidental disengagement
  • Compliant
    • Meets ANSI Z359.18 and OSHA 1910.140, 1926.502 Anchorage Connector standards

Applications: Bridge work, Buildings, Warehouses, Arenas & Parking ramps

Reminder – Phasing Out Will Be on July 31st

With the launch of the New Sliding Beam Anchors, 3M™ will be phasing out their existing 3M™ BeamWalk, Glyder™ & BeamDog™ Sliding Beam Anchor lines. The phasing out of out of the 3M™ BeamWalk, Glyder™ & BeamDog™ will be on July 31st 2018. To help with the phasing out and phasing in of the new Sliding Beam Anchors, please refer to the Crossover List below.

Discontinued Product Numbers New Product Numbers Description
4650-3 2104710 3M™ DBI-SALA® Sliding Beam Anchor – Small
2104700 2104710 3M™ DBI-SALA® Sliding Beam Anchor – Small
2110941 2104715 3M™ DBI-SALA® Sliding Beam Anchor – Large
AJ704A 2104703 3M™ Protecta® Sliding Beam Anchor – Small

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *