How to Cut the Perfect Hole

Champion’s Carbide Tipped Hole Cutters Drill More Holes Faster & More Efficiently

The only way to cut the perfect hole is with a high quality hole cutter. For the past 10 years, Champion’s Carbide Tipped Hole Cutters have been the top choice for professional electricians, plumbers, mechanics, and contractors. With Champion’s Carbide Tipped Hole Cutters you get the efficiency of a Carbide Tipped Annular Cutter without the need of a Magnetic Drill Press. Instead, professionals have the ability to use these high quality hole cutters in a portable handheld drill. Champion Carbide Tipped Hole Cutters far outperform Bi-Metal Holesaws with longer tool life, more consistent & cleaner hole cuts, easier slug ejection, and superior performance when cutting steel plate, stainless steel, aluminum, copper, cast iron, fiberglass, and plastics. The triple cutting tooth geometry delivers better control with rapid chip removal, creating bur free holes. Drill more holes, reduce cost per hole, and increase productivity with these high quality hole cutters. Champion Carbide Tipped Hole Cutters are the perfect tool to cut the perfect hole.

Carbide Tipped Hole Cutters Chart

Carbide Tipped Hole Cutter Size Ranges & Material

  • CT3 – 1/8” depth of cut and 5/8″ – 1″ diameters
    • Ideal for sheet metal and other thin materials
  • CT5 – 3/16” depth of cut and 9/16” – 5” diameters
    • Ideal for stainless steel, steel plate, iron, aluminum, copper cast iron, FRP, & plastics
    • Developed with a safety collar stop to prevent over penetration while drilling at fast speeds
  • CT7 – 1” depth of cut and 9/16” – 4-1/2” diameters
    • Ideal for stainless steel, steel plate, iron, aluminum, copper cast iron, FRP, & plastics
    • Developed with a safety collar stop to prevent over penetration while drilling at fast speeds
  • CT9 – 2” in depth of cut, 1-1/2” and 2-1/8” diameters
    • Developed for the specific applications of drilling lock set and deadbolt holes in steel doors
Carbide Tipped Hole Cutter

How to Use Carbide Tipped Hole Cutters

  • Insert the carbide tipped hole cutter into a portable handheld drill
  • Secure drill chuck on the three flats of hole cutter shank
  • Begin drilling using light feed pressure until the hole cutter has begun drilling
  • Apply medium feed pressure once the cutter has engaged in material
  • Do not press the hole cutter strongly into the material after the pilot drill has penetrated, as this may damage the carbide tips
  • Always use rotation hand drills with no impact or with a rotation only mode
  • BruteLube cutting fluid or wax is recommended for the best tool performance and a longer cutting tool life

Learn More About Champions Carbide Tipped Hole Cutter & See Them in Action!

For more information about Champion’s high quality Carbide Tipped Hole Cutters check out our previous blog post: Check out Champion’s Carbide Tipped Hole Cutters In Action!. In this previous blog post you will learn more about the features and benefits of Champion’s Carbide Tipped Hole Cutters. Along with this information you will be able to watch videos of these hole cutters in action! All of Champion’s Carbide Tipped Hole Cutters can be found and bought online at TannerBolt.com.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *