Find the Right Adhesive Anchoring System for Your Job

Adhesive Anchoring Systems from DeWalt® Engineered by Powers™

The Bond that Holds the System Together

With 3 levels of performance, these new adhesive anchors allow you the choice from the cost efficient options all the way to the heavy duty working load options, that will give you the highest level of performance. All 3 levels of the new adhesive anchoring systems from DeWalt® Engineered by Powers™ will provide you with reliable installation each and every time. Read on to learn more about each of these new lines of adhesive anchors. From the High Performance to the Basic lines, we want to help you find the right adhesive for your job.

Looking for ICC-ES & Seismic Approved Adhesive Anchors?

When looking for ICC-ES and Seismic approved adhesive anchors, be sure to check out the High Performance and Standard Adhesive Anchoring Systems. The AC200+™,  PURE110+®, AC100+ GOLD® are all ICC-ES and Seismic approved adhesive anchoring systems. With the PURE50+™ only being ICC-ES approved.

High Performance Adhesives

AC200+™ – Acrylic Injection Adhesive Anchoring SystemAC200

  • ICC-ES APPROVED – approved for cracked and uncracked concrete
  • SEISMIC – approved for seismic design categories A-F
  • BOND STRENGTH – high performance
  • CONVENIENT – wide installation temperature range with small edge distances and spacings
  • EASY TO USE – fast hardening adhesive; reliable installation and easy to dispense
  • CLEANING – hand or power brush clean; or use the Hollow Drill Bit / DustX+™ cleaning method
  • EMBEDMENT – depths ranging from 4d to 20d

AC200 Listings


PURE110+® – Epoxy Injection Adhesive Anchoring SystemPure110

  • ICC-ES APPROVED – approved for cracked and uncracked concrete, and seismic applications
  • ICC-ES APPROVED – for post-installed rebar
  • SEISMIC – approved for seismic design categories A-F
  • BOND STRENGTH – high bond strength at 110° F; no reduction in bond strength due to service temperature shifts
  • VERSATILE – dispensing options – 1:1 and 3:1
  • CONVENIENT – easy hole cleaning methods and fast curing times

Pure110 Listings


Standard Adhesives

AC100+ GOLD® – Vinylester Injection Adhesive Anchoring SystemAC100gold

  • ICC-ES APPROVED – approved for cracked and uncracked concrete, and grouted or hollow masonry
  • SEISMIC – approved for seismic design categories A-F
  • LOW TEMPERATURE DISPENSING – approved for dispensing down to 14° F
  • VERSATILE – low odor formula with quick cure time
  • DOT – wide range of listings; 27 states
  • CERTIFIED TO NSF/ANSI 61 – drinking water system components

AC100Gold Listings


PURE50+™ – Epoxy Injection Adhesive Anchoring Systempure50

  • ICC-ES APPROVED – approved for cracked and uncracked concrete
  • EVALUATED AND RECOGNIZED – for long and short term loading
  • INSTALLATION TEMPERATURE – can be installed in a wide range of base material temperatures
  • TESTED – for creep resistance
  • DESIGNED – specifically with road, bridge and concrete contractors in mind
  • EVALUATED AND RECOGNIZED – for freeze/thaw performance

Pure50 Listings


Basic Adhesives

AC50™ – Adhesive Anchoring SystemAC50CURES – down to 5° F

  • INSTALLATION TEMPERATURE – installs in a wide range of material temperatures
  • EVALUATED AND RECOGNIZED – for long and short term loading

AC50 Listings


PURE GP – Epoxy Injection Adhesive Anchoring SystemPureGP

  • DESIGNED – for use with threaded rod and rebar

PureGP Listings

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *