Check out Champion’s Carbide Tipped Hole Cutters In Action!

More Holes, Cleaner Holes, Pull Out Quicker and Safer, Lower Cost Per Hole

Champion’s Carbide Tipped Hole Cutters are made with ultra-hard tungsten carbide teeth and each component has been specially developed to perform well during each and every cut. The ejector spring in each hole cutter is designed to automatically eject the slug to save time while drilling multiple holes. A built in safety feature on each hole cutter is the safety collar stop, this prevents over penetration for safer and faster operation. As an added bonus there is no added cutting oil cost or clean up required. Champions Carbide Tipped Hole Cutters are a great cost effective alternative to bi-metal holesaws.

 

 

CT3 Carbide Tipped Hole CuttersCT3 Carbide Tipped Hole Cutter

  • Perfect for battery powered drills – more holes per charge
  • Quick change hex shank allows for fast and easy chucking with the Quick Change Driver
  • Can also be used on regular chucks
  • When cutting through 1mm – ± 1/16″ Stainless Steel
    • Pilot drill time – 5 seconds
    • Hole cutter time – 17 seconds
    • Pullout / transfer time – 2 seconds

For cutting stainless steel, sheet metal and tubing up to 1/8” with fast, clean cuts every time

Perfect for use in battery powered drills because they cut quickly and use very little power

 

CT5 Carbide Tipped Hole CuttersCT5 Carbide Tipped Hole Cutter

  • When cutting through 2mm – 1/16″ Stainless Steel
    • Pilot Drill time – 6 seconds
    • Hole Cutter time – 14 seconds
    • Pullout / Transfer time – 2 seconds

For cutting steel plate, iron, aluminum, copper, cast iron, stainless steel, FRP (i.e fiberglass) and plastics up to 3/16” thick

Perfect portable tool for the professional electrician, plumber, mechanic and contractor

 

 

CT7 Carbide Tipped Hole CuttersCT7 Carbide Tipped Hole Cutter

  • 3 edged cutters – for smoother / faster cutting (outside, center, inside)
  • Multi functional – for cutting thick steel up to 25mm – 1″ thick, Stainless Steel, piping and other materials
  • When cutting through 10 mm – 3/8″ ASTM-A283 Carbon Steel
    • Pilot Drill time – 4 seconds
    • Hole Cutter time – 14 seconds
    • Pullout / Transfer time – 2 seconds

For cutting steel plate, iron, aluminum, copper, cast iron, stainless steel, FRP (i.e fiberglass) and plastics up to 1” thick

Perfect portable tool for the professional electrician, plumber, mechanic and contractor

You may also like...

1 Response

  1. May 25, 2016

    […] about Champion’s high quality Carbide Tipped Hole Cutters check out our previous blog post: Check out Champion’s Carbide Tipped Hole Cutters In Action!. In this previous blog post you will learn more about the features and benefits of Champion’s […]

Leave a Reply

Your email address will not be published. Required fields are marked *